Roller Type Lapping Unit SP-As1/As2

back to the list

SP-As1/As2 is a roller type specimen rotating machine to be attached to the polishing machine IM-P2
The SP-As1/As2 can be equipped on to the IM-P2 to allow for automatic polishing of non-mounted specimens.
Ideal for specimens that call for lengthy, low-speed lapping.
Custom-made holders designed for a specific specimen are also available.

Main Specifications

  • Built-in oscillation function! The SP-As1 comes with an oscillation function built to the arm, allowing for improved surface roughness with suppressed grinding resistance and reduced edge undercutting.
    Moreover, liberal use of a polishing cloth helps prevent buildup of the polish material for uniform polishing of the entire specimen surface.
    With the ability to polish with light pressure, the oscillation function can also help increase the service life of the polishing cloth.
  • Automatically polish non-mounted specimens! Ideal for specimens that call for lengthy, low-speed lapping, the SP-As1/As2 can be equipped on to the IM-P2 to allow for automatic polishing of non-mounted specimens.
    Custom-made holders designed for a specific specimen are also available.
  • SP-As1/SP-As2 Loading Plate(Optional)
    Lapping Plate
    Application
    Cast lron Lapping Plate φ200-250mm
    Slurries of 6μm or less
    Copper Lapping Plate φ200-250mm
    Slurries of 3 to 15μm
    Tin Lapping Plate φ200-250mm
    Slurries of 6μm or more
    Diamond Correction Ring
    Surface plate flatness correction

Machine Specifications

Adapted Holder Size Approx. φ70mm to 125mm
Oscillation Speed 2 to 40 full oscillations/minute, adjustable
Power Supply Single-phase 100V or single-phase 200 to 220V
Use outlet of IM-P2
Dimensions/Weight W410×D655×H390mm, 39kg
Values are for IM-P2 with SP-As1/As2
Oscillation Width Oscillation range adjustable to between 8°and 16°
Oscillation Position Adjustment Center position of oscillation can be configured as desired
Specimen-Holding Arm Adjustable to between 0° and 40°
Timer Optional (Attachable to IM-P2, auto-stop)

IM-P2 Machine Specifications

Disc Size Polishing disc: φ200mm or 250mm
Polishing disc: φ200mm or 250mm
Magnetic disc: φ200mm or 250mm
discs sold separately
Rotation Speed 50 to 400rpm, adjustable(50/60Hz common)
Supply/drain water function Opening/closing of water supply cock.(attached water supply/drain hose)
Power Supply Single-phase 100V, 50/60Hz, or single-phase 200 to 220V
50/60Hz 200W geared motor
Dimensions/Weight W390×D655(to drainage opening)×H195mm/31kg


Contact

Osaka Officemap
2F, 3F, 4-9-45 Minamihorie, Nishi-ku,
Osaka city, Japan 550-0015

TEL:06-6760-4781
FAX:06-6760-4782

Nagoya Officemap
Yoshitaka Bldg. 1F,
1-902 Kamiyashiro, Mito-ku,
Nagoya city, Aichi, Japan 465-0025

TEL:052-715-6111
FAX:052-715-6112

Tokyo Officemap
Suehiro JF Bldg. 7F,
5-1-5 Sotokanda, Chiyoda-ku,
Tokyo, Japan 101-0021

TEL:03-6803-2270
FAX:03-3835-3324

Wakayama Head Officemap
1333 Nishinoji, Inami-cho,
Hidaka-gun, Wakayama 649-1528

TEL:0738-43-0333
FAX:0738-43-0485

Overseamap
Room917, No555,
West Zhongshan Road,
Oasis Tower, Shanghai

TEL:021-6286-3152
FAX:021-6286-3153